![background image](http://html.mh-extra.com/html/asus/prl-dls533/prl-dls533_user-manual_26755146.webp)
ASUS PRL-DLS533 motherboard user guide
5-43
NT4
W2K
WXP
NNW
SCO
UNX
LNX
C. Existing System Installation
This procedure assumes SCO UNIX is already installed on a hard disk
drive. This installation is necessary to build a new UNIX kernel that includes
the proper LSI host adapter driver. The basic steps for accomplishing this
are outlined below. For more details on UNIX installation, refer to the SCO
UNIX System Administrator’s Reference Manual.
The SCO OpenServer 5 system automatically creates a file unix.safe
during installation. To access this UNIX kernel, type after the “boot:” prompt:
unix.safe
Press Enter.
C1. Installing the lsil driver
1.
Insert the SDMS BTLD diskette in the floppy drive and type:
# installpkg
Press Enter to continue.
2.
A prompt appears to insert the requested diskette. Since the BTLD
diskette is already inserted, press Enter.
3.
A prompt asks for the name of the package. Type:
lsil
Press Enter to continue.
4.
If a driver is already present from a previous installation, a prompt
inquires about replacing it. Reply y for yes.
5.
Once the install package (installpkg) has completed, relink the kernel
by typing:
# /etc/conf/cf.d/link_unix
6.
The system executes the command then prompts for a series of
responses:
a. “Do you want this kernel to boot by default (y/n)?”
Type: y and press Enter. The system backs up the old kernel.
b. “Do you want the kernel environment rebuilt (y/n)?”
Type: y and press Enter.
Содержание PRL-DLS533
