Asus PRIME H270M-PLUS Скачать руководство пользователя страница 33

Appendix

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions:

• 

This device may not cause harmful interference.

• 

This device must accept any interference received including interference that may cause 

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with manufacturer’s instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user 

is encouraged to try to correct the interference by one or more of the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment to an outlet on a circuit different from that to which the receiver 

is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required 

to assure compliance with FCC regulations. Changes or modifications to this unit not 

expressly approved by the party responsible for compliance could void the user’s authority 

to operate this equipment.

IC: Canadian Compliance Statement

Complies with the Canadian ICES-003 Class B specifications. This device complies with RSS 

210 of Industry Canada. This Class B device meets all the requirements of the Canadian 

interference-causing equipment regulations. 
This device complies with Industry Canada license exempt RSS standard(s). Operation is 

subject to the following two conditions: (1) this device may not cause interference, and (2) 

this device must accept any interference, including interference that may cause undesired 

operation of the device. 
Cut appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada. 

Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le 

matériel brouilleur du Canada. 
Cet appareil est conforme aux normes CNR exemptes de licence d’Industrie Canada. Le 

fonctionnement est soumis aux deux conditions suivantes : 
(1) cet appareil ne doit pas provoquer d’interférences et 
(2) cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer 

un fonctionnement non souhaité de l’appareil. 

ASUS PRIME H270M-PLUS

A-1

Содержание PRIME H270M-PLUS






































Отзывы: