1-6
Chapter 1: Product Introduction
1.2.2
Rear panel connectors
Ethernet port
Speed
LED
Activity Link
LED
Activity/Link LED
Speed LED
Status
Description
Status
Description
Off
No link
Off
10Mbps connection
Orange
Linked
Orange
100Mbps connection
Orange (Blinking)
Data activity
Green
1Gbps connection
Orange (Blinking
then steady)
Ready to wake
up from S5 mode
10
10
2
3
4
5
6
7
11
12
1
8
9
Ethernet port LED indications
1.
Video Graphics Adapter (VGA) port.
This 15-pin port is for a VGA monitor or other
VGA-compatible devices.
2.
PS/2 Keyboard/Mouse combo port.
This port is for a PS/2 keyboard or mouse.
3.
USB 3.2 Gen 2 (up to 10Gbps) ports (teal blue, Type A).
These 9-pin Universal
Serial Bus 3.2 (USB 3.2) ports are for USB 3.2 Gen 2 devices.
4.
Ethernet port.
This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table below for the Ethernet port LED indications.
5.
Line In port (light blue).
This port connects the tape, CD, DVD player, or other audio
sources.
6.
Line Out port (lime).
This port connects a headphone or a speaker. In 4-channel,
5.1-channel, and 7.1-channel configurations, the function of this port becomes Front
Speaker Out.
7.
BIOS FlashBack
TM
button.
Press the BIOS FlashBack
TM
button for three seconds until
the FlashBack
TM
LED blinks three times, indicating that the BIOS FlashBack
TM
function
is enabled.
8.
DVI-D port.
This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
9. HDMI
TM
port.
This port is for a High-Definition Multimedia Interface (HDMI
TM
)
connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other
protected content.