ASUS PRIME B360-PLUS
1-3
M.2 socket 3
These sockets allow you to install
M.2 (NGFF) SSD modules.
M.2_2(SOCKET3)
2280 2260 2242
M.2_1(SOCKET3)
2280 2260 2242
PRIME Z270-P M.2(SOCKET3)s
PRIME Z270-P
•
These sockets support M Key and type 2242/2260/2280 storage devices.
•
Only the M.2_2 socket can support Intel
®
Optane™ memory.
•
The M.2_1 socket supports data transfer speed up to 16Gb/s.
•
The M.2_2 socket supports data transfer speed up to 32Gb/s.
•
Only the M.2_1 socket can support SATA mode storage devices. When a device in
SATA mode is installed on the M.2_1 socket, SATA_2 is disabled.
Intel
®
B360 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
Clear RTC RAM (2-pin CLRTC)
This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Use a metal object such as a screwdriver to short the two
pins.
3.
Plug the power cord and turn ON the computer.
4.
Hold down the <
Del
> key during the boot process and
enter BIOS setup to re-enter data.
CLRTC
+3V_BAT GND
PIN 1
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
