Asus PIKE II 3008 Series Скачать руководство пользователя страница 4

Страница: 4 / 80

About this guide

This user guide contains the information you need when installing and configuring the server

management board.

How this guide is organized

This guide contains the following parts:

•

Chapter 1: Product introduction

This chapter offers the PIKE II 3008 SAS RAID card features and the new technologies

it supports.

•

Chapter 2: RAID configuration

This chapter provides instructions on setting up, creating, and configuring RAID sets

using the available utilities.

•

Chapter 3: Driver installation

This chapter provides instructions for installing the RAID drivers on different operating

systems.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

ASUS websites

The ASUS website provides updated information on ASUS hardware and software

products. Refer to the ASUS contact information.

Optional documentation

Your product package may include optional documentation, such as warranty flyers,

that may have been added by your dealer. These documents are not part of the

standard package.

Содержание PIKE II 3008 Series

















































































Результаты поиска

Содержание PIKE II 3008 Series

Отзывы:

Похожие инструкции для PIKE II 3008 Series

Бренды по названию

Популярные бренды

Asus PIKE II 3008 Series, Руководство пользователя

Результаты поиска

Содержание PIKE II 3008 Series

Отзывы:

Похожие инструкции для PIKE II 3008 Series

Бренды по названию

Популярные бренды