Asus PEB-10G/SFP+ Series, Руководство пользователя

Страница: 15 / 38

ASUS PEB-10G/SFP+ Series 2-5
2.1.3 iSCSI Boot Configuration
Comprehensive Configuration Management v7.2.14
Copyright (C) 2000-2012 Broadcom Corporation
All rights reserved.
General Parameters
Initiator Parameters
1st Target Parameters
2nd Target Parameters
Secondary Device Parameters
iSCSI Boot Main Menu
Configure General Boot Parameters
[Enter]:Enter Next Menu; [
↑|↓
]:Next Entry; [ESC]:Quit Menu
Current Adapter:Primary, Bus=03 Device=00 Func=00, MAC=C8:60:00:22:86:B7
General Parameters
TCP/IP Parameters via DHCP [Enabled]
This option applies to IPv4.
[Enabled] The iSCSI boot host software acquires the IP address from the
DHCP server.
[Disabled] The iSCSI boot host software acquires the static IP address.
iSCSI Parameters via DHCP [Enabled]
[Enabled] The iSCSI boot host software acquires its iSCSI target parameters
from the DHCP server.
[Disabled] The iSCSI boot host software acquires its iSCSI target parameters
via the static IP address, which is entered through the iSCSI
Initiator Parameters Configuration screen.
CHAP Authentication [Disabled]
[Enabled] Allows the iSCSI boot host software to use CHAP authentication
when connecting to the iSCSI target. Enter the CHAP ID and
CHAP Secret in the Initiator Parameters configuration screen.
[Disabled] Does not allow the iSCSI boot host software to use CHAP
authentication when connecting to the iSCSI target.
Boot to iSCSI Target [Enabled]
[Enabled] The iSCSI boot host software immediately attempts to boot from
the iSCSI target after successfully connecting to it.
[Disabled] The iSCSI boot host software does not attempt to boot from the
iSCSI target after successfully connecting to it. The control will
then return to the system BIOS so that the next boot device may
be used.