manualshive.com logo in svg

Asus PCI-L101, Руководство пользователя

Поделиться
Скачать
Asus PCI-L101 Скачать руководство пользователя страница 11

11

ASUS PCI-L101 User’s Manual

II. Installation

LAN / WOL Cables

II. INSTALLATION

Connect the Network Cable

Twisted Pair Ethernet (TPE) - Connect a single network cable to the ASUS PCI-
L101 PCI adapter as shown below. For 100BASE-TX, your network cable must be
category 5 (not category 3), twisted-pair wiring with RJ45 connectors. If you plan on
running the adapter at 100 Mbps, it must be connected to a 100BASE-TX hub (not a
100BASE-T4 hub). For 10BASE-T, use category 3, 4, or 5 twisted-pair wiring.

WARNING: Turn off and unplug power to the computer before installing the WOL
cable. The WOL connector on your motherboard is live when the computer is plugged
in to a power outlet. Failure to do so could damage the adapter or computer.

Connect the Wake On LAN Power Cable

In order for the Wake On LAN (WOL) feature to work correctly, the adapter must be
connected to a continous power source. This allows the ASUS PCI-L101 adapter to
“listen to” the network even when the computer is turned off. To install the WOL
power cable, carefully follow the procedure below. Warning: Turn off and unplug power
to the computer before installing the WOL cable. The WOL connector on your mother-
board is live when the computer is plugged in to a power outlet. Failure to do so could
damage the adapter or computer.

Installing the WOL Power Cable
1. Make sure your computer is completely unplugged from the power outlet.

2. Locate the WOL connector on the ASUS PCI-L101 adapter. Attach one end of the

WOL cable to the adapter. Note that the connector is keyed.

3. Locate the WOL connector on your motherboard. The location varies, depending

on vendor and model of motherboard.

4. Connect the other end of the WOL cable to the connector on the motherboard.

Note that the connector is keyed.

5. Some computers may require you to change a setting in your computer’s BIOS or

Setup program to enable the WOL feature. Check your computer owner’s manual
or contact your dealer for more information.

6. Replace the computer cover and plug in the power cord. Install only one active

WOL adapter per computer. You can install additional, non-WOL adapters.

IMPORTANT!

 The ATX or NLX power supply must deliver at least 720mAmp on

the 5volt standby lead (5VSB) in order for the Wake On LAN to work properly.

Содержание PCI-L101





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды