background image

iii

Notices

Federal.Communications.Commission.Statement

This device complies with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
•  This device may not cause harmful interference, and
•  This device must accept any interference received including interference that 

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance 

with manufacturer’s instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will 

not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment to an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is 

required to assure compliance with FCC regulations. Changes or modifications 

to this unit not expressly approved by the party responsible for compliance could 
void the user’s authority to operate this equipment.

As  an  Energy  Star

® 

Partner,  our  company  has  determined  that  this 

product meets the Energy Star

® 

guidelines for energy efficiency.

Canadian Department of Communications Statement

This  digital  apparatus  does  not  exceed  the  Class  B  limits  for  radio 

noise emissions from digital apparatus set out in the Radio Interference 

Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian 

Interference - Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du 
Réglement sur le matériel brouiller du Canada.

Содержание PA249 Series



























Отзывы: