Asus P9D-MH series Скачать руководство пользователя

Страница: 91 / 186

ASUS S1016P

5-25

Flow Control [Hardware RTS/CTS]

Flow control can prevent data loss from buffer overflow. When sending data, if the receiving

buffers are full, a “stop” signal can be sent to stop the data flow. Once the buffers are empty,

a “start” signal can be sent to re-start the flow. Hardware flow control uses two wires to send

start/stop signals. Configuration options: [None] [Hardware RTS/CTS]

VT -UTF8 Combo Key Support [Enabled]

This allows you to enable the VT -UTF8 Combination Key Support for ANSI/VT100 terminals.

Configuration options: [Disabled] [Enabled]

Recorder Mode [Disabled]

This allows you to enable or disable the Recorded mode to capture Terminal data.

Configuration options: [Disabled] [Enabled]

Resolution 100x31 [Enabled]

This allows you to enable or disable the extended terminal resolution. Configuration options:

[Disabled] [Enabled]

Legacy OS Redirection Resolution [80x24]

This allows you to set the number of rows and columns supported on the Legacy OS.

Configuration options: [80x24] [80x25]

Putty Keypad [VT100]

This allows you to select the FunctionKey and Keypad on Putty. Configuration options: [VT100]

[LINUX] [XTERMR6] [SCO] [ESCN] [VT400]

Redirection After BIOS POST [Bootloader]

This setting allows you to specify if Bootloader is selected than Legacy console redirection.

Configuration options: [Always Enable] [Bootloader]

Serial Port for Out-of-Band Management / Windows Emergency Management Services
(EMS) Settings

The following items only appears when you set the

Console Redirection

to [Enabled].

Out-of-Band Mgmt Port [COM1]

Allows remote management of a Windows Server OS through a serial port. Configuration

options: [COM1] [COM2]

Terminal Type [VT-UTF8]

Allows you to set the terminal type for out-of-band management. Configuration options:

[VT100]

ASCII char set.

[VT100+]

Extends VT100 to support color, function keys, et.

[VT-UTF8]

Uses UTF8 encoding to map Unicode chars onto 1 or more bytes

[ANSI]

Extended ASCII char set

Bits per second [115200]

Selects serial port transmission speed. The speed must be matched on the other side. Long or

noisy lines may require lower speeds. Configuration options: [9600] [19200] [57600] [115200]

Flow Control [None]

Allows you to set the flow control to prevent data loss from buffer overflow. Configuration options:

[None] [Hardware RTS/CTS] [Software Xon/Xoff]

Содержание P9D-MH series



























































































































































































Результаты поиска

Содержание P9D-MH series

Отзывы:

Похожие инструкции для P9D-MH series

Бренды по названию

Популярные бренды

Asus P9D-MH series, Руководство пользователя

Результаты поиска

Содержание P9D-MH series

Отзывы:

Похожие инструкции для P9D-MH series

Бренды по названию

Популярные бренды