background image

1-24

Chapter 1: Product introduction

6. 

Intel

®

 H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via 

Serial ATA 3.0 Gb/s signal cables.

• 

You must install Windows

®

 XP Service Pack 3 or later version before using Serial ATA 

hard disk drives.

• 

Due to H61 Chipset limitation, AHCI Mode only works on Windows

®

 Vista/Windows

®

 7. 

Please use IDE Mode on Windows

®

 XP.

• 

[IDE] is the default SATA type Using Windows

®

 XP, there is no need to change the 

SATA type.

• 

To configure the default SATA type in BIOS, click 

Advanced Mode 

>

 Advanced 

tab >

 

SATA Configuration 

>

 SATA Mode Selection

.

• 

When using hot-plug and NCQ, set the

 SATA Mode

 

Selection 

item in the BIOS to 

[AHCI]. See section 

2.5.3 SATA Configuration

 for details.

SATA3G_3

GND

RSATA_RXP3

RSATA_RXN3

GND

RSATA_TXN3

RSATA_TXP3

GND

SATA3G_1

GND

RSATA_RXP1

RSATA_RXN1

GND

RSATA_TXN1

RSATA_TXP1

GND

SATA3G_2

GND

RSATA_TXP2

RSATA_TXN2

GND

RSATA_RXN2

RSATA_RXP2

GND

SATA3G_4

GND

RSATA_TXP4

RSATA_TXN4

GND

RSATA_RXN4

RSATA_RXP4

GND

P8H61-M LK R2.0 SATA 3.0Gb/s connectors

P8H61-M LK R2.0

Содержание P8H61-M LK R2.0










































































Отзывы: