3-30
Chapter 3: BIOS setup
Chapter 3
3.7.7
Hardware Monitor
CPU Temperature(PECI) / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select
Ignored
if you do not wish to display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chassis Fan 1 Speed [xxxxRPM] or [Ignored] / [N/A]
Power Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis, and
power fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard,
the field shows
N/A
. Select
Ignored
if you do not wish to display the detected speed.
CPU Q-Fan Control [Disabled]
[Disabled]
Disables the CPU Q-Fan control feature.
[Enabled]
Enables the CPU Q-Fan control feature.
CPU Fan Profile [Standard]
This item appears only when you enable the
CPU Q-Fan Control
feature and allows
you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
CPU Temperature (PECI)
←→
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Hardware Monitor
CPU Temperature(PECI)
[35ºC/95ºF]
MB Temperature
[34ºC/93ºF]
CPU Fan Speed
[3590RPM]
CPU Q-Fan Control
[Disabled]
Chassis Fan 1 Speed
[N/A]
Chassis Q-Fan Control
[Disabled]
Power Fan Speed
[N/A]
CPU Voltage
[ 1.040V]
3.3V Voltage
[ 3.008V]
5V Voltage
[ 4.776V]
12V Voltage
[11.648V]
[Ctrl-Esc]
Allows you to turn on the system by pressing the Ctrl key and Esc key
of the PS/2 keyboard. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
[Power Key]
Allows you to turn on the system by pressing the Power key on the PS/2
keyboard. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead.
Содержание P7H55D-M EVO
Страница 1: ...Motherboard P7H55D M EVO ...
Страница 14: ...xiv ...
Страница 102: ...3 40 Chapter 3 BIOS setup Chapter 3 ...
Страница 114: ...4 12 Chapter 4 Software support Chapter 4 ...