manualshive.com logo in svg

Asus P5W, Руководство пользователя, Страница: 106 / 210

Поделиться
Скачать
Asus P5W Скачать руководство пользователя страница 106

-0

Chapter : BIOS setup

4.4.7 

PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP 

devices. The menu includes setting IRQ and DMA channel resources for either 

PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA 

devices.

Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections

 

      may cause system to malfunction.

Plug And Play O/S 

 

[No]

PCI Latency Timer 

 

[64]

Allocate IRQ to PCI VGA   

[Yes]

Palette Snooping 

 

[Disabled]

IRQ-3 assigned to 

 

[PCI Device]

IRQ-4 assigned to 

 

[PCI Device]

IRQ-5 assigned to 

 

[PCI Device]

IRQ-7 assigned to 

 

[PCI Device]

IRQ-9 assigned to 

 

[PCI Device]

IRQ-10 assigned to 

 

[PCI Device]

IRQ-11 assigned to 

 

[PCI Device]

IRQ-14 assigned to 

 

[PCI Device]

IRQ-15 assigned to 

 

[PCI Device]

Plug And Play O/S [No]

When set to [No], BIOS configures all the devices in the system. When set to 

[Yes] and if you install a Plug and Play operating system, the operating system 

configures the Plug and Play devices not required for boot. Configuration options: 

[No] [Yes]

PCI Latency Timer [64]

Allows you to select the value in units of PCI clocks for the PCI device latency 

timer register. Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]

Allocate IRQ to PCI VGA [Yes]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for 

an IRQ. When set to [No], BIOS does not assign an IRQ to the PCI VGA card even 

if requested. Configuration options: [No] [Yes]

Palette Snooping [Disabled]

When set to [Enabled], the palette snooping feature informs the PCI devices that 

an ISA graphics device is installed in the system so that the latter can function 

correctly. Configuration options: [Disabled] [Enabled]

Take caution when changing the settings of the PCI PnP menu items. Incorrect 

field values can cause the system to malfunction.

NO: Lets the BIOS 

configue all the 

devices in the system.

YES: Lets the 

operating system 

configure Plug and Play 

(PnP) devices not 

required for boot if 

your system has a Plug 

and Play operating 

system.

Содержание P5W



















































































































































































































Отзывы:

Нет отзывов