Asus P5V800-MX, Руководство пользователя

Страница: 76 / 90

2 - 3 2 2 - 3 2
2 - 3 2 2 - 3 2
2 - 3 2 C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p C h a p t e r 2 : B I O S s e t u p
C h a p t e r 2 : B I O S s e t u p
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
User Access Level
[Full Access]
Change User Password
Clear User Password
Password Check
[Setup]
Boot Sector Virus Protection [Disabled]
If you forget your BIOS password, you can clear clear it by erasing the
CMOS Real Time Clock (RTC) RAM. See section “1.9 Jumpers” for
information on how to erase the RTC RAM.
Change Supervisor Password Change Supervisor Password
Change Supervisor Password Change Supervisor Password
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default N o t I n s t a l l e d
N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d.
After you set a password, this item shows I n s t a l l e d
I n s t a l l e d
I n s t a l l e d I n s t a l l e d I n s t a l l e d.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press <Enter>. The message “Password Uninstalled” appears.