2-4
Chapter 2: BIOS setup
• This function can support devices such as USB flash disks, or floppy disks
with
FAT 32/16
format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
2.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS-based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt>
+
<F2>
during the Power-On Self Tests (POST).
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the
system.
3. You can launch the EZ Flash 2 in two ways.
(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press
<Alt>
+
<F2>
during POST to display the following.
(2) Enter BIOS setup program. Go to the
Tools
menu then select
EZ Flash
2
and press
<Enter>
.
You can switch between drives by pressing
<Tab>
before the correct file
is found. Then press
<Enter>
.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
FLASH TYPE:
MXIC 25L8005
PATH:
A:\
BOARD:
P5QL-EM
VER:
0303 (H:00 B:26)
DATE:
06/19/2008
Содержание P5QL
