Asus P5QL-CM Скачать руководство пользователя

Страница: 55 / 60

ASUS P5QL-CM

2-15

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Power

Management (APM). Select an item then press

<Enter>

to display the configuration options.

Suspend Mode [Auto]

ACPI 2.0 Support

[Disabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor

BIOS SETUP UTILITY

Main Advanced

Power

Boot Tools Exit

Select the ACPI state

used for System

Suspend.

2.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used

for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

[S1(POS) Only]

- Enables the system to enter the ACPI S1 (Power on Suspend) sleep

state. In S1 sleep state, the system appears suspended and stays in a low power

mode. The system can be resumed at any time.

[S3 Only]

- Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state

(default). In S3 sleep state, the system appears to be off and consumes less power

than in the S1 state. When signaled by a wake-up device or event, the system resumes

to its working state exactly where it was left off.

[Auto]

- Detected by OS.

2.5.2

ACPI 2.0 Support [Disabled]

Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0

specifications. Configuration options: [Disabled] [Enabled]

2.5.3

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)

support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI

APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled]

[Enabled]

2.5.4

APM Configuration

Restore on AC Power Loss [Power Off]

When set to

[Power Off]

, the system goes into off state after an AC power loss. When set

[Power On]

, the system goes on after an AC power loss. When set to

[Last State]

, the

system goes into either off or on state, whatever the system state was before the AC power

loss. Configuration options: [Power Off] [Power On] [Last State]

Содержание P5QL-CM





























































Результаты поиска

Содержание P5QL-CM

Отзывы:

Похожие инструкции для P5QL-CM

Бренды по названию

Популярные бренды

Asus P5QL-CM, Руководство пользователя

Результаты поиска

Содержание P5QL-CM

Отзывы:

Похожие инструкции для P5QL-CM

Бренды по названию

Популярные бренды