2-30
Chapter 2: BIOS setup
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Configuration options: [Power Off] [Power On] [Last State]
PWR Button < 4 secs [Instant-Off]
Allows you to set the event after the power button is pressed for more than 4
seconds. Configuration options: [Suspend] [Instant-Off]
Power On By PCI/PCIE Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI/PCIE devices
& NV Onboard LAN. Configuration options: [Disabled] [Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
2.5.3
APM Configuration
Select Menu
Item Specific Help
Press [Enter] to
select whether or not
to restart the system
after AC power loss
Phoenix-Award BIOS CMOS Setup Utility
Power
F1:Help
↑↓
: Select Item
-/+: Change Value
F5: Setup Defaults
ESC: Exit
→←
: Select Menu
Enter: Select SubMenu
F10: Save and Exit
APM Configuration
Restore on AC Power Loss
[
Power-Off
]
PWR Button < 4 secs
[Instant-Off]
Power On By PCI/PCIE Devices [Disabled]
Power On By External Modems [Disabled]
Power On by RTC Alarm
[Disabled]
x Date (of Month) Alarm 0
x Alarm Time (hh:mm)
0 :0 : 0
HPET Support
[Enabled]
Power On By Keyboard
[Disabled]
Power On By PS/2 Mouse
[Disabled]
