Asus P5LD2-TVM SE/S Скачать руководство пользователя страница 20

Страница: 20 / 72

Chapter 1: Product introduction

1.3.2

Installling the CPU heatsink and fan

The Intel

Pentium

LGA775 processor requires a specially designed heatsink

and fan assembly to ensure optimum thermal condition and performance.

• Install the motherboard to the chassis before you install the CPU fan and

heatsink assembly

• When you buy a boxed Intel

Pentium

processor, the package

includes the CPU fan and heatsink assembly. If you buy a CPU separately,

make sure that you use only Intel

-certified multi-directional heatsink and

fan.

• Your Intel

Pentium

LGA775 heatsink and fan assembly comes in a

push-pin design and requires no tool to install.

If you purchased a separate CPU heatsink and fan assembly, make sure that

a Thermal Interface Material is properly applied to the CPU heatsink or CPU

before you install the heatsink and fan assembly.

Fastener

Motherboard hole

To install the CPU heatsink and fan:
1. Place the heatsink on top of the

installed CPU, making sure that

the four fasteners match the holes

on the motherboard.

Make sure to orient each fastener with the narrow end of the groove pointing

outward. (The photo shows the groove shaded for emphasis.)

Orient the heatsink and fan

assembly such that the CPU

fan cable is closest to the CPU

fan connector.

Narrow end of

the groove

Содержание P5LD2-TVM SE/S









































































Результаты поиска

Содержание P5LD2-TVM SE/S

Отзывы:

Бренды по названию

Популярные бренды

Asus P5LD2-TVM SE/S, Руководство пользователя

Результаты поиска

Содержание P5LD2-TVM SE/S

Отзывы:

Бренды по названию

Популярные бренды