Asus P5K DELUXE Скачать руководство пользователя страница 138

Страница: 138 / 172

5-30

Chapter 5: Software support

If you want to boot the system from a hard disk drive included in a created RAID

set, copy first the RAID driver from the support DVD to a floppy disk before you

install an operating system to the selected hard disk drive. Refer to section

5.5

Creating a RAID driver disk

for details.

5.4

RAID configurations

The motherboard comes with the Intel

ICH8R Southbridge RAID controller that

allow you to configure IDE and Serial ATA hard disk drives as RAID sets. The

motherboard supports the following RAID configurations.

RAID 0

(Data striping) optimizes two identical hard disk drives to read and write

data in parallel, interleaved stacks. Two hard disks perform the same work as a

single drive but at a sustained data transfer rate, double that of a single disk alone,

thus improving data access and storage. Use of two new identical hard disk drives

is required for this setup.

RAID 1

(Data mirroring) copies and maintains an identical image of data from one

drive to a second drive. If one drive fails, the disk array management software

directs all applications to the surviving drive as it contains a complete copy of

the data in the other drive. This RAID configuration provides data protection and

increases fault tolerance to the entire system. Use two new drives or use an

existing drive and a new drive for this setup. The new drive must be of the same

size or larger than the existing drive.

Содержание P5K DELUXE













































































































































































Результаты поиска

Содержание P5K DELUXE

Отзывы:

Похожие инструкции для P5K DELUXE

Бренды по названию

Популярные бренды

Asus P5K DELUXE, Руководство пользователя

Результаты поиска

Содержание P5K DELUXE

Отзывы:

Похожие инструкции для P5K DELUXE

Бренды по названию

Популярные бренды