1-10
Chapter 1: Product introduction
2.
Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature. When you
set this jumper to pins 2–3 (+5VSB), you can wake up the computer by pressing a key
on the keyboard (the default is the Space Bar)s. This feature requires an ATX power
supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in
the BIOS.
3.
USB device wake-up (3-pin USBPW1-4, 3-pin USBPW5-8)
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
P5G41-M LX Keyboard Power Setting
2
1
2 3
+5V
(Default)
+5VSB
KBPWR
P5G41-M LX
P5G41-M LX
P5G41-M LX USB Device Wake Up
2
1
2 3
+5V
(Default)
+5VSB
USBPW5-8
2
1
2
3
+5V
+5VSB
(Default)
USBPW1-4
1.7
Connectors
1.7.1
Rear panel connectors
9
2
6
7
10
1
3 4
5
8
Содержание P5G41-M LX
Страница 1: ...Motherboard P5G41 M LX ...
