Asus P5E - AiLifestyle Series Motherboard Скачать руководство пользователя страница 144

Страница: 144 / 176

5-36

Chapter 5: Software support

5.4.3

Intel

RAID configurations

This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 (0+1) and Intel

Matrix Storage configurations for Serial ATA hard disks drives through the Intel

ICH8R Southbridge chip.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID

set(s). To do this:
1. Enter the BIOS Setup during POST.

2. Go to the Main Menu, select IDE Configuration, then press <Enter>.
3. Select the item Configure SATA As, then press <Enter> to display the

configuration options.

4. Select RAID from the Configure SATA As item options, then press <Enter>.

5. Select the item Onboard Serial-ATA BOOTROM, press <Enter>, then select

Enabled from the options.

6. Save your changes, then exit the BIOS Setup.

Refer to the system or the motherboard user guide for details on entering and

navigating through the BIOS Setup.

5.4.2

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1.  Install the SATA hard disks into the drive bays.
2.  Connect the SATA signal cables.
3.  Connect a SATA power cable to the power connector on each drive.

Содержание P5E - AiLifestyle Series Motherboard

















































































































































































Результаты поиска

Содержание P5E - AiLifestyle Series Motherboard

Отзывы:

Бренды по названию

Популярные бренды

Asus P5E - AiLifestyle Series Motherboard, Инструкция по эксплуатации

Результаты поиска

Содержание P5E - AiLifestyle Series Motherboard

Отзывы:

Бренды по названию

Популярные бренды