Asus P5B VM - AiLifestyle Series Motherboard Скачать руководство пользователя страница 61

Страница: 61 / 156

ASUS P5BV-M

4-5

4.1.3.

ASUS.CrashFree.BIOS.3.utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. �ou

can update a corrupted BIOS file using the USB flash disk, or the floppy disk that

contains the updated BIOS file.

• Prepare

the USB flash disk,

or the floppy disk containing the updated

motherboard BIOS before using this utility.

• Ensure that you rename the original or updated BIOS file in the floppy disk

or the USB flash disk

• Visit ASUS website (www.asus.com) to download the latest BIOS file.

Recovering the BIOS from the USB flash disk

To recover the BIOS from the USB flash disk:
1. Insert the USB flash disk that contains BIOS file to the USB port.

2. Turn on the system.

3. The utility will automatically checks the devices for the BIOS file when found,

the utility reads the BIOS file and starts flashing the corrupted BIOS file.

4. Restart the system after the utility completes the updating process.

• Only the USB flash disk with FAT 32/16 format and single partition can

support ASUS CrashFree BIOS 3. The device size should be smaller than

8GB.

• DO NOT shut down or reset the system while updating the BIOS! Doing so

can cause system boot failure!

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:

1. Turn on the system.

2. Insert the floppy disk with the original or updated BIOS file to the floppy disk

drive.

3. The utility displays the following message and automatically checks the

floppy disk for the original or updated BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Содержание P5B VM - AiLifestyle Series Motherboard





























































































































































Результаты поиска

Содержание P5B VM - AiLifestyle Series Motherboard

Отзывы:

Бренды по названию

Популярные бренды

Asus P5B VM - AiLifestyle Series Motherboard, Руководство пользователя

Результаты поиска

Содержание P5B VM - AiLifestyle Series Motherboard

Отзывы:

Бренды по названию

Популярные бренды