Doc. No:
ASUSTeK COMPUTER INC.
P505 SERVICE GUIDE
Date: DEC.02, 2004
Rev.: Page:
9
ASUS P505 FABRICATE PROCEDURE-
Steps 1:1.Enter the position hole between AP KEY 1,2 and
3,4 KEY
2.Put MICROPNONE into C-PART_ASSY position
Notice: there are 2 position of raised on MICROPHONE
RUBBER .it need locate in trough of 2 open
holes
Steps 2:1.Put APKEY_BD into APKEY HOLDER.
2.Fixed 2 SCREWS on AKEY_BD.
3.Paste 2 PCB ESD GASKET-1 on APKEY.
HOLDER.
4.Ress down whole APKEY HOLDER. Make 3 bolts
lock APKEY HOLDER.
5.Keep the KEYPAD_FPC of KEYPAD_ASSY on APKEY
HOLDER.
