Asus P4BGL-ED Скачать руководство пользователя страница 64

Страница: 64 / 70

3-4

Chapter 3: Starting-Up

3.2.2

Software and drivers installation menus

The menu lists the drivers and utilities that are available for this
motherboard. Also, included is the contact information for technical
support. Simply click on the specific tab of your choice.

Intel Chipset Inf Update Program

Click this item to load the installation wizard and install the Intel Chipset
update driver.

Intel Application Accelerator Driver

Click this item to load the installation wizard and install the Intel Application
Accelerator.

Intel Brookdale-G Graphics Driver

This item installs the Intel Brookdale-D Graphics driver.

Avance Logic AC’97 Audio Driver

This item prepares setup for Avance Logic AC’97 Audio compliance.

Realtek LAN Driver

This item installs the Realtek LAN driver.

PCI Modem Card Driver

This menu option displays setup notes for PCI Modem card driver.

ENE CB1410 CARDBUS CONTROLLER Driver

This menu option displays setup notes for manual installation of ENE
CB1410 cardbus controller.

Содержание P4BGL-ED







































































Результаты поиска

Содержание P4BGL-ED

Отзывы:

Asus P4BGL-ED, Руководство пользователя, Страница: 64 / 70

Результаты поиска

Содержание P4BGL-ED

Отзывы: