Asus P4B266-C Скачать руководство пользователя страница 111

Страница: 111 / 126

ASUS P4B266-C motherboard user guide

5-13

5.3.4 Multi-Channel Audio Feature

The C-Media PCI Audio Driver and Applications are included in the
Support CD that came with your motherboard package. Install these
programs to enable the multi-channel audio feature.

You may also launch the Mixer by
clicking on the

Start

button on your

Windows desktop, then select

Programs/PCI Audio Applications/
Mixer/Audio Rack

3. Click on the mixer icon to display the C-Media Audio Mixer.

4. Click on the

Advanced

button on

the Mixer to display the Speaker,
Volume, Sound Effects, and
Options menus.

Advanced Button

Make sure that the BCS1/BCS2 jumpers are set correctly before using
the 6-channel audio feature. See page 2-21 for the settings.

You must use 4 or 6 channel speakers for this setup.

Mixer Icon

Setting the C-Media Audio Mixer

1. Install the C-Media 6-channel PCI audio driver from the support CD.

2. After installation, the C-Media Mixer icon

appears on the bottom right of the screen.

Содержание P4B266-C































































































































Результаты поиска

Содержание P4B266-C

Отзывы:

Asus P4B266-C, Руководство пользователя, Страница: 111 / 126

Результаты поиска

Содержание P4B266-C

Отзывы: