Asus Motherboard A8N-SLI Premium Скачать руководство пользователя страница 21

Страница: 21 / 182

ASUS A8N-SLI Premium

1-5

1.3.2 ASUS Proactive features

AI NOS™ (Non-Delay Overclocking System)

ASUS Non-delay Overclocking System™ (NOS) is a technology that

auto-detects the CPU loading and dynamically overclocks the CPU speed

only when needed. See page 4-30 for details.

AI Cool-Pipe

ASUS AI Cool-Pipe is a unique heat pipe design that dissipates heat

away from the chipset. This device signiﬁcantly lowers overall system

temperature for a quiet and stable system performance.

Precision Tweaker

Designed for overclocking aﬁcionados, this feature allows you to ﬁne tune

the CPU/memory voltage and gradually increase the Front Side Bus (FSB)

and PCI Express frequency to achieve maximum system performance.

AI NET 2

AI NET 2 is a BIOS-based diagnostic tool that detects and reports

Ethernet cable faults and shorts. With this utility, you can easily monitor

the condition of the Ethernet cable(s) connected to the LAN (RJ-45)

port(s). During the bootup process, AI NET 2 immediately diagnoses the

LAN cable(s) and reports shorts and faults up to 100 meters at 1 meter

accuracy. See pages 4-32 and 5-11 for details.

AI Audio technology

The motherboard supports 8-channel audio through the onboard ALC850

CODEC with 16-bit DAC, a stereo 16-bit ADC, and an AC97 2.3 compatible

multi-channel audio designed for PC multimedia systems. It also provides

Jack-Sensing function, S/PDIF out support, interrupt capability and includes

the Realtek

proprietary UAJ

(Universal Audio Jack) technology. See pages

2-19, 2-20 and 5-12 for details.

Содержание Motherboard A8N-SLI Premium























































































































































































Результаты поиска

Содержание Motherboard A8N-SLI Premium

Отзывы:

Asus Motherboard A8N-SLI Premium, Руководство пользователя, Страница: 21 / 182

Результаты поиска

Содержание Motherboard A8N-SLI Premium

Отзывы: