Asus Motherboard A7V8X Скачать руководство пользователя страница 129

Страница: 129 / 142

ASUS A7V8X motherboard user guide

5-29

5.4.3 Creating a RAID 0 array (Performance)

1. In the FastBuild™ utility main menu, press “1” to select Auto Setup.

The following screen appears.

2. Use the arrow keys to go to the field

Optimize Array for

and select

“Performance” with the space bar. The

Mode

field displays “Stripe”.

3. After making a selection, press <Ctrl-Y> to save and create a RAID 0

array.

4. Press any key to reboot the system. During the boot process, the

MBFastTrak376 BIOS checks and displays the disk array information.

5. Once the array is created, use the FDISK utility to format the array as a

single hard drive.

6. After you have formatted the arrayed drives, install an operating

system (OS). The OS will treat the RAID 0 array as a single drive unit.

7. Install the RAID driver from the support CD that came with the

motherboard package.

Depending on the operating system you are installing, you may need
to install the RAID driver during or after the OS installation.

Содержание Motherboard A7V8X















































































































































Результаты поиска

Содержание Motherboard A7V8X

Отзывы:

Asus Motherboard A7V8X, Руководство пользователя, Страница: 129 / 142

Результаты поиска

Содержание Motherboard A7V8X

Отзывы: