manualshive.com logo in svg

Asus maximus viii formula, Руководство пользователя, Страница: 204 / 218

Поделиться
Скачать
Asus maximus viii formula Скачать руководство пользователя страница 204

5-2

Chapter 5: RAID Support

Chapter 5

5.1.2 

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance, install 

identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1. 

Install the SATA hard disks into the drive bays.

2. 

Connect the SATA signal cables.

3. 

Connect a SATA power cable to the power connector on each drive.

5.1.3 

Setting the RAID item in BIOS

You must enable the RAID function in the BIOS Setup before creating RAID sets using SATA 

HDDs. To do this:

1. 

Enter the BIOS Setup during POST.

2. 

Go to the 

Advanced

 menu > 

SATA Configuration

, and then press <Enter>.

3. 

Set the SATA Mode item to [RAID Mode].

4. 

Save your changes, and then exit the BIOS Setup.

Refer to Chapter 3 for details on entering and navigating through the BIOS Setup

Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at 

RAID mode together.

Содержание maximus viii formula



























































































































































































































Отзывы:

Нет отзывов