Asus MAXIMUS VI GENE страница 187 Скачать руководство пользователя

Страница: 187 / 192

ASUS MAXIMUS VI GENE

A-1

Appendices

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

This device may not cause harmful interference.
This device must accept any interference received including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with manufacturer’s instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.
Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required

to assure compliance with FCC regulations. Changes or modifications to this unit not

expressly approved by the party responsible for compliance could void the user’s authority

to operate this equipment.

•
•

•
•
•

•

Appendices

Содержание MAXIMUS VI GENE

































































































































































































Результаты поиска

Содержание MAXIMUS VI GENE

Отзывы:

Похожие инструкции для MAXIMUS VI GENE

Бренды по названию

Популярные бренды

Asus MAXIMUS VI GENE, Руководство пользователя

Результаты поиска

Содержание MAXIMUS VI GENE

Отзывы:

Похожие инструкции для MAXIMUS VI GENE

Бренды по названию

Популярные бренды