Asus MAXIMUS FORMULA Скачать руководство пользователя страница 52

Страница: 52 / 168

2-26

Chapter 2: Hardware information

2. Position the motherboard

I/O side toward the chassis

rear panel and install the

motherboard to the chassis.

3. Thread the LCD Poster cable

through the opening until its

stopper snaps into place.

4. Plug the LCD Poster cable into

the onboard connector labeled

LCD_CON.

5. This photo shows the LCD

Poster installed. Place the

device wherever you can

monitor the screen.

1. Install the I/O shield to the chassis rear panel. Orient the I/O shield so that

the openings of the ports fit the motherboard rear ports. Snaps the I/O shield

into place.

2.7.2

I/O shield and LCD Poster Installation

Be cautious when installing

the I/O shield. The I/O shield

edge springs may damage

the I/O ports.

Содержание MAXIMUS FORMULA









































































































































































Результаты поиска

Содержание MAXIMUS FORMULA

Отзывы:

Asus MAXIMUS FORMULA, Руководство пользователя, Страница: 52 / 168

Результаты поиска

Содержание MAXIMUS FORMULA

Отзывы: