manualshive.com logo in svg

Asus M4N82 Deluxe, Руководство пользователя

Поделиться
Скачать
Asus M4N82 Deluxe Скачать руководство пользователя страница 96

3-36

Chapter 3: BIOS setup

Chapter 3

• 

This function can support devices such as a USB flash drive or a floppy disk with FAT 

32/16 format and single partition only.

• 

DO NOT shut down or reset the system while updating the BIOS to prevent the 

system boot failure!

• 

We recommend that you update the BIOS file only coming from the same memory/CPU 

configuration and BIOS version.

• 

Only the CMO file can be loaded.

3.9.4 

AI NET 2

Check Realtek Phy LAN Cable [Disabled]

[Disabled] 

BIOS will not check the Realtek Phy LAN cable during the Power-On Self-

Test (POST).

[Enabled] 

BIOS checks the Realtek Phy LAN cable during the Power-On Self-Test 

(POST).

AI NET 2

Pair  Status  Length

Check Realtek Phy LAN cable    [Disabled]

BIOS SETUP UTILITY

                                                    

Tools

 

Check Realtek Phy  

LAN cable during  

POST.

It will take 3 to 10 

seconds to diagnose 

LAN cable.

Содержание M4N82 Deluxe

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды