manualshive.com logo in svg

Asus M2N-X PLUS, Руководство пользователя

Поделиться
Скачать
Asus M2N-X PLUS Скачать руководство пользователя страница 21

ASUS M2N-X

1-9

3.  Position the CPU above the 

socket such that the CPU corner 

with the gold triangle matches 

the  socket corner with a small 

triangle.

4.  Carefully insert the CPU into the 

socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU into 

the socket to prevent bending the pins and damaging the CPU!

5.  When the CPU is in place, push 

down the socket lever to secure 

the CPU. The lever clicks on the 

side tab to indicate that it is 

locked.

6.  Install a CPU heatsink and fan 

following the instructions that 

came with the heatsink package.

Gold triangle

Small triangle

7.  Connect the CPU fan cable to the CPU_FAN connector on the 

motherboard.

Do not forget to connect the CPU fan connector! Hardware monitoring 

errors can occur if you fail to plug this connector.

M2N-X

M2N-X CPU Fan Connector

CPU_FAN

GND

CPU FAN PWR

CPU FAN IN

CPU FAN PWM

Содержание M2N-X PLUS





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды