Asus M2N-L Скачать руководство пользователя страница 39

Страница: 39 / 108

ASUS

M2N-L

2.7.2

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert

one end of the cable to this connector, then connect the other end to the

signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when

using a FDD cable with a covered Pin 5.

2. IDE connector (40-1 pin PRI_IDE)

The onboard IDE connector is for the Ultra DMA 133/100/66/33 signal cable.

There are three connectors on each Ultra DMA 133/100/66/33 signal cable:

blue, black, and gray. Connect the blue connector to the motherboard’s IDE

connector, then select one of the following modes to configure your device.

M2N-L F

loppy Disk Drive Connector

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

PIN1

FLOPPY

M2N-L

IDE Connector

NOTE:

Orient the red markings

(usually zigzag) on the ID

ribbon cable to PIN 1.

PRI_IDE

Содержание M2N-L













































































































Результаты поиска

Содержание M2N-L

Отзывы:

Бренды по названию

Популярные бренды

Asus M2N-L, Руководство пользователя

Результаты поиска

Содержание M2N-L

Отзывы:

Бренды по названию

Популярные бренды