Asus M2A690G V Series Скачать руководство пользователя страница 73

Страница: 73 / 108

5-4

Chapter 5: BIOS setup

Message:

Do You Want To Save Bios (Y/N)

5.1.3 Award BIOS Flash Utility

The Basic Input/Output System (BIOS) can be updated using the

AwardBIOS Flash Utility. Follow these instructions to update the BIOS using

this utility.

1. Obtain the latest BIOS file from the ASUS web site or the support CD.

Normally the file name is

.BIN. Save it to a floppy disk.

Save only the updated BIOS file in the floppy disk to avoid loading the

wrong BIOS file.

2. Copy the AwardBIOS Flash Utility (awdflash.exe) to the floppy disk

with the latest BIOS file.

3. Boot the system in DOS mode using the bootable floppy disk you

created earlier.

4. When the A:> appears, replace the bootable floppy disk with the

floppy disk containing the new BIOS file and the Award BIOS Flash

Utility.

5. At the prompt, type

awdflash then press

<Enter>. The Award

BIOS Flash Utility screen

appears.

AwardBIOS Flash Utility for ASUS V8.64

Message:

Please input File Name!

For MCP61S-M2A-VM-00 DATE:08/25/2006

Flash Type - Winbond W39V040FC/C(4Mb)

File Name to Program:

AwardBIOS Flash Utility for ASUS V8.64

6. Type the BIOS file name

in the File Name to

Program

field, then press

<Enter>.

For MCP61S-M2A-VM-00 DATE:08/25/2006

Flash Type - Winbond W39V040FC/C(4Mb)

File Name to Program:

M2A-VM.bin

The information on

the screen here may

not be exactly as

yours and it’s only

for reference use.

Содержание M2A690G V Series













































































































Результаты поиска

Содержание M2A690G V Series

Отзывы:

Похожие инструкции для M2A690G V Series

Бренды по названию

Популярные бренды

Asus M2A690G V Series, Руководство по установке

Результаты поиска

Содержание M2A690G V Series

Отзывы:

Похожие инструкции для M2A690G V Series

Бренды по названию

Популярные бренды