manualshive.com logo in svg

Asus L1N64-SLI WS - Motherboard - SSI CEB, Руководство пользователя

Поделиться
Скачать
Asus L1N64-SLI WS - Motherboard - SSI CEB Скачать руководство пользователя страница 50

2-2

Chapter 2: Hardware information

8.  Power connectors (24-pin EATXPWR, 8-pin EATX12V, 4-pin EZ_PLUG1)

These connectors are for ATX power supply plugs. The power supply plugs 

are designed to fit these connectors in only one orientation. Find the proper 

orientation and push down firmly until the connectors completely fit.

7.  Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. 

Connect one end of the chassis intrusion sensor or switch cable to this 

connector. The chassis intrusion sensor or switch sends a high-level signal to 

this connector when a chassis component is removed or replaced. The signal 

is then generated as a chassis intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted with 

a jumper cap. Remove the jumper caps only when you intend to use the 

chassis intrusion detection feature.

•  Make sure to connect the 8-pin ATX +12V power plug when installing two 

CPUs. 

•  You can either use the 4-pin +12V power plug or 8-pin ATX +12V power 

plug when installing only one CPU.

L1N64-SLI

WS

L1N64-SLI WS Chassis intrusion connector

CHASSIS

+5VSB_M

B

Chassis Signal GND

(Default)

L1N64-SLI

WS

L1N64-SLI WS ATX power connectors

EATXPWR

ATX12V

+3 V

olts

+3 V

olts

Ground

+5 V

olts

+5 V

olts

Ground

Ground

Power O

K

+5V Standby

+12 V

olts

-5 V

olts

+5 V

olts

+3 V

olts

-12 V

olts

Ground

Ground Ground PSON#

Ground

+5 V

olts

+12 V

olts

+3 V

olts

+5 V

olts

Ground

GND

+12V

GND

+12V

GND

+12V

GND

+12V

EZ_PLUG1

+5V EZ_DET GND +12V

for CPU1

for CPU0

Содержание L1N64-SLI WS - Motherboard - SSI CEB















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды