Asus J1800I-C, Руководство пользователя

Страница: 13 / 58

ASUS J1800I-C
1-5
1.4.2 Memory configurations
You may install 1GB, 2GB, 4GB and 8GB unbuffered non-ECC DDR3 SO-DIMMs into the
DIMM sockets.
• Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain memory modules from the same vendor.
• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or
less.
J1800I-C Series Motherboard Qualified Vendors Lists (QVL)
DDR3-1333 MHz capability
DDR3-1600 MHz capability
Vendors Part No. Size SS/DS Chip Brand Chip NO. Timing Voltage
DIMM socket
support (Optional)
1 DIMM 2 DIMMs
CRUCIAL CT102464BF1339.C16FER 8GB DS CRUCIAL CT512X8-1339 - 1.35V
G.SKILL F3-1333C9D-8GSL 4GB DS - K4B2G0846C 9-9-9-24 1.35V •
GEIL GGS38GB1333C9DC 4GB DS HYNIX H5TQ2G83CFR 9-9-9-24 1.3V •
Vendors Part No. Size SS/DS Chip
Brand Chip NO.
Timing Voltage
DIMM socket
support (Optional)
1 DIMM 2 DIMMs
KINGSTON KVR16LS11/4 4GB DS NANYA NT5CC512M8CN-DI - 1.35V •
SAMSUNG M473B5773DHO-YKO 1251 2GB DS - GEHXB8A3C - 1.35V •
SAMSUNG M471B5273EBO-CKO 1231 4GB DS - SEC231BCKDK4B2GO846E - 1.35V •
TRANSCEND TS512MSK64W6H 4GB DS - K4B4G0846B - 1.35V •
TRANSCEND TS1GSK64W6H 8GB DS - K4B4G0846B - 1.35V
ADATA ADDS1600W4G11-B 4GB DS ADATA QWND-1211AEL1329V - 1.35V •
ADATA ADDS1600W8G11-B 8GB DS ADATA QWND-1211AEL1329V - 1.35V
PQI MFCDR521UA0101 4GB DS PQI PQD312O8D12R - 1.35V •
PQI MFCDR621UA0103 8GB DS PQI PQD312O8D12R - 1.35V
Visit the ASUS website at www.asus.com for the latest QVL.
SS: Single-sided / DS: Double-sided
DIMM support:
•
A*: Supports one module inserted into either slot.
• B*: Supports one pair of modules inserted into both the slots.
• Using both memory channels is supported on this motherboard. When installing 2
SO-DIMMs, use the same size and type of memory. The DIMM_A1 slot should be
filled in order for the motherboard to work properly.
• Memory modules with a voltage higher than 1.35V will run at 1.35V.
• When installing memory with frequency higher than 1333Mhz, the motherboard will
automatically run the memory at 1333Mhz. DDR3 1066Mhz memory modules are not
supported.