Asus ISDNLink INET-800, Руководство пользователя

Страница: 53 / 84

45
Setup: Internet Router
Figure 18: Virtual Server Operation
IP Address seen by Internet Users
Note that, in this illustration, both Internet users are connecting to the same IP
Address, but using different protocols.
To Internet users, all virtual Servers on your LAN have the same IP Address.
This IP Address is the IP Address from ISP on the Quick Setup screen. This address
should be static (fixed), rather than dynamic, to make it easier for Internet users to
connect to your Servers.
Using Virtual Servers
1. Enable the Server type or types you wish to use.
This can be done by clicking within the "Enable" column, to toggle the
value On or Off.
If creating or editing an entry, an
Enable
checkbox is available.
2. Enter the IP Address of each server on your LAN.
3. Click OK when finished.
4. Advise Internet users of the IP Address to use. (The IP Address allocated
by the ISP, not the address on your LAN.) Note that because all Servers
have the same IP Address, the appropriate client software (e.g. Browser,
FTP client, Mail Client) must be used so that Internet users will be con-
nected to the correct server.
5. Ensure that the connection to the Internet is established. Internet users
cannot open a connection.
Defining Virtual Servers
If the type of Server you wish to use is not listed, you can define it by clicking the
Add button. You will see a screen like the example below.