Installation Quick Start Guide
27
Installing a RAID 5 Disk Array with Hot Fix
9. StorCon
asks for the capacity to use for each drive (see
). Type in the
physical drive capacity that you recorded in
for RAID 5 and press <Enter>.
10. StorCon
asks if you want to set the host drive type to ‘Cluster’. Refer to your product’s
Hardware Guide to determine if clustering is supported before pressing <y> or <n> to
confirm your choice.
The new host drive is created. See
11. Exit StorCon
by pressing <Esc> several times to escape out of the various menus and
pressing <y> to quit.
Depending on the size of the host drive, the RAID 5 build process may take a
considerable amount of time. You may exit out of StorCon
without waiting for the
Figure A-7. Drive Capacity
Figure A-8. Newly Created Host Drive
