Asus H97-PLUS, Руководство пользователя

Страница: 26 / 86

1-16
Chapter 1: Product introduction
3. Intel ® H97 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel ® Rapid Storage Technology through the onboard Intel ® H97
chipset.
• These connectors are set to [ AHCI ] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode Selection item in the BIOS to
[
RAID
]. See section
2.6.3 PCH Storage Configuration
for details.
• Before creating a RAID set, refer to the RAID Supplementary Guide included in the
folder named Manual in the support DVD.
• When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI].
M.2 Socket 3 shares the bandwidth with SATA6G_5 and SATA6G_6 ports. To ensure that
the M.2 PCIe device is working properly, SATA ports 5 and 6 are disabled. See section
2.6.3 PCH Storage Configuration of this user guide for more details.
SATA6G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
SATA6G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA6G_4
GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND
SATA6G_3
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND
SATA6G_6
GND
RSATA_TXP6 RSATA_TXN6
GND
RSATA_RXN6 RSATA_RXP6
GND
SATA6G_5
GND
RSATA_TXP5 RSATA_TXN5
GND
RSATA_RXN5 RSATA_RXP5
GND
H97-PLUS
H97-PLUS SATA 6.0Gb/s connectors
• The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
• The CPU_FAN and CHA_FAN connectors support the ASUS FAN Xpert 2+ feature.
• The chassis fan connectors support DC and PWM modes. To set these fans to DC or
PWM, go to Advanced Mode > Monitor > Chassis Fan 1/2 Q-Fan Control items in
BIOS.