Asus H110M-PLUS D3, Руководство пользователя

Страница: 23 / 55

ASUS H110M-PLUS D3
1-13
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Headset
2.1-channel
4.1-channel 5.1-channel 7.1-channel
Light Blue (Rear panel) Line In Rear Speaker Out Rear Speaker Out
Rear Speaker
Out
Lime (Rear panel) Line Out Front Speaker Out Front Speaker Out
Front Speaker
Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Lime (Front panel) - - -
Side Speaker
Out
To configure a 7.1-channel audio output:
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
7. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
8. USB 3.1 ports. This Universal Serial Bus (USB) port is for USB 3.1 devices.
• DO NOT connect keyboard/mouse to any USB 3.1 port when installing Windows ® 7
system.
• Due to USB 3.1 controller limitation, USB 3.1 devices can only be used under
Windows
®
OS environment and after the USB 3.1 driver installation.
• We strongly recommend that you connect USB 3.1 devices to USB 3.1 ports for faster
and better performance from your USB 3.1 devices.
9. USB 3.0 ports . These 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices.
Due to the design of the Intel® 100 series chipset, all USB devices connected to the USB
2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices
must update their firmware for better compatibility.
10. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
11. DVI-D port. This port is for any DVI-D compatible device.
DVI-D can not be converted to output from RGB Signal to CRT and is not compatible with
DVI-I.
12. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.