1-18
Chapter 1: Product introduction
6.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an
AC’97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD]. See section
2.6.8 Onboard Devices Configuration
for
details.
H110M-E D3
H110M-E D3 Front panel audio connector
AAFP
PIN 1
AGND NC SENSE1_RETUR
SENSE2_RETUR
PORT1 L PORT1 R PORT2 R
SENSE_SEND
PORT2 L
HD-audio-compliant
pin definition
PIN 1
AGND NC NC
NC
MIC2
MICPWR
Line out_R
NC
Line out_L
Legacy AC’97
compliant definition
The S/PDIF module is purchased separately.
7.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
H110M-E D3
H110M-E D3 Digital audio connector
SPDIF_OUT
+5V
SPDIFOUT GND
Содержание H110M-E D3
Страница 1: ...Motherboard H110M E D3 ...
Страница 10: ...x ...
Страница 32: ...1 22 Chapter 1 Product introduction ...
Страница 50: ...2 18 Chapter 2 Getting started ...