GigaX2024B/M L2 Managed Switch CLI Manual
16
Command Mode
Interface mode
No/clear
switchport trunk allowed vlan remove VLANLIST
Show
show vlan [VLANID]
Default
None or depends on ODM customer
Description
Use the switchport trunk allowed vlan configuration command
on the switch stack or standalone switch to add or remove the
allowed VLANs that can receive and send traffic on this interface
in tagged format when in trunking mode
Example
ASUS(config-if)# switchport trunk allowed vlan add 2-20
6.
802.1x:
6.1
dot1x guest-vlan <1-3000>
Syntax
dot1x guest-vlan <1-3000>
Parameters
<1-3000> valid vlan-id range is from 1 to 3000
Command Mode
Interface mode
No/clear
no dot1x guest-vlan
Show
show dot1x all / show dot1x interface IFNAME
Default
No default guest vlan
Description
Use the dot1x guest-vlan interface configuration command
on the switch stack or on a standalone switch to specify an
active VLAN as an 802.1X guest VLAN. Use the no form of this
command to return to the default setting.
Example
ASUS(config-if)#dot1x guest-vlan 2
6.2
dot1x max-req <1-10>
Syntax
dot1x max-req <1-10>
Parameters
<1-10> max-req times ; valid values are from 1 to 10
Command Mode
Interface mode
No/clear
no dot1x max-req
Show
show dot1x all