Asus GigaX 2008EX Скачать руководство пользователя

Страница: 2 / 71

E2328

First Edition V1
Nov 2005

of this manual, including the products and software described in it, may be

reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language in any form or by any means, except documentation kept by

the purchaser for backup purposes, without the express written permission of

ASUSTeK COMPUTER INC. (ASUS).
Product warranty or service will not be extended if: (1) the product is repaired,

modiﬁed or altered, unless such repair, modiﬁcation of alteration is authorized in

writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS provides this manual “as is” without warranty of any kind, either express

or implied, including but not limited to the implied warranties or conditions of

merchantability or fitness for a particular purpose. In no event shall ASUS,

its directors, ofﬁcers, employees, or agents be liable for any indirect, special,

incidental, or consequential damages (including damages for loss of profits,

loss of business, loss of use or data, interruption of business and the like), even

if ASUS has been advised of the possibility of such damages arising from any

defect or error in this manual or product.
Specifications and information contained in this manual are furnished for

informational use only, and are subject to change at any time without notice,

and should not be construed as a commitment by ASUS. ASUS assumes no

responsibility or liability for any errors or inaccuracies that may appear in this

manual, including the products and software described in it.
Products and corporate names appearing in this manual may or may not be

registered trademarks or copyrights of their respective companies, and are used

only for identiﬁcation or explanation and to the ownersʼ beneﬁt, without intent to

infringe.

Содержание GigaX 2008EX








































































Результаты поиска

Содержание GigaX 2008EX

Отзывы:

Похожие инструкции для GigaX 2008EX

Бренды по названию

Популярные бренды

Asus GigaX 2008EX, Руководство пользователя

Результаты поиска

Содержание GigaX 2008EX

Отзывы:

Похожие инструкции для GigaX 2008EX

Бренды по названию

Популярные бренды