Asus F1A75-M PRO R2.0 Скачать руководство пользователя страница 69

Страница: 69 / 78

Chapter 2: BIOS information

2-23

2.6.1

CPU Temperature / MB Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU and motherboard

temperatures. Select

Ignore

if you do not wish to display the detected temperatures.

2.6.2

CPU / Chassis / Power Fan Speed [xxxx RPM] or

[Ignore] / [N/A]

The onboard hardware monitor automatically detects and displays the CPU / chassis / power

fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the

field shows

N/A

. Select

Ignore

if you do not wish to display the detected speed.

2.6.3

CPU Q-Fan Control [Disabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU Fan Speed Low Limit [600 RPM]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to disable or set the CPU fan warning speed. Configuration options: [Ignore]

[200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]

CPU Fan Profile [Standard]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on

the CPU temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual] Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set

CPU Fan Profile

to [Manual].

CPU Upper Temperature [70ºC]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range

from 20ºC to 90ºC.

CPU Fan Max. Duty Cycle(%) [100%]

Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from

40% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at

the maximum duty cycle.

CPU Lower Temperature [20ºC]

Displays the lower limit of the CPU temperature.

CPU Fan Min. Duty Cycle(%) [40%]

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from

40% to 100%. When the CPU temperature is under the lower limit, the CPU fan will operate at

the minimum duty cycle.

Содержание F1A75-M PRO R2.0















































































Результаты поиска

Содержание F1A75-M PRO R2.0

Отзывы:

Похожие инструкции для F1A75-M PRO R2.0

Бренды по названию

Популярные бренды

Asus F1A75-M PRO R2.0, Руководство пользователя

Результаты поиска

Содержание F1A75-M PRO R2.0

Отзывы:

Похожие инструкции для F1A75-M PRO R2.0

Бренды по названию

Популярные бренды