Asus ESC8000 4G Series, Руководство пользователя

Страница: 64 / 186

Chapter 3: Installation Options 3-2
Rear of Enclosure
Cabinet D
epth
Rear Mounting
Flange
Keep
-out
Zone f
or R
ail
Keep
-out
Zone f
or R
ail
CMA
Front of Enclosure Front Mounting Flange
2” for Handle
A
B
3.1 Rail Kit
The rail kit package includes:
2 x 1200 mm rack rails (or 2 x 1000 mm rack rails)
4 x M4X4L screws
8 x ø 17.1 screws
8 x #10-32 screws
(or 10 x #10-32 screws for 1000 mm rack rails)
Rack
2 x M5X20L screws
Rear end
Front end
Rack rails
• The bundled screw package includes different types of screws for you to choose from,
not all screws are required for the installation.
• Package content and specifications are subject to change without notice.
Even without a CMA, another 9” (for 1200 mm rack rails) or 2” (for 1000 mm rack rails) of
additional keep-out zone should be reserved behind the inner rail. No obstructions such as
power cables or sockets should be present in this keep-out zone.
4 x #6-32X4L screws
3.1.1 Selecting rack rail cabinets
Refer to the guide below for more information on selecting a rack rail cabinet and rack rail for
your server system.
1200 mm rack rail with CMA
A = 700.3 mm (27.6”) ~ 965.5 mm (38”)
A + B > 1125 mm (44.3”)
1200 mm rack rail without CMA
A = 700.3 mm (27.6”) ~ 965.5 mm (38”)
A + B > 1025 mm (40.4”)
1000 mm rack rail without CMA
A = 685.7 mm (27”) ~ 916.5 mm (36”)
A + B > 835 mm (32.9”)