manualshive.com logo in svg

Asus ESC700 G4, Руководство пользователя, Страница: 75 / 130

Поделиться
Скачать
Asus ESC700 G4 Скачать руководство пользователя страница 75

ASUS ESC700 G4

3-29

24.  Aura Addressable RGB header (4-pin ADD_HEADER)

This connector is for individually addressable RGB WS2812B LED strips or WS2812B 

based LED strips.

The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/

Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs.

Before you install or remove any component, ensure that the ATX power supply is switched 

off or the power cord is detached from the power supply. Failure to do so may cause severe 

damage to the motherboard, peripherals, or components.

• 

Actual lighting and color will vary with LED strip.

• 

If your LED strip does not light up, check if the addressable RGB LED strip is 

connected in the correct orientation, and the 5V connector is aligned with the 5V 

header on the motherboard.

• 

The addressable RGB LED strip will only light up under the operating system.

• 

The addressable RGB LED strip is purchased separately.

Содержание ESC700 G4



































































































































Отзывы:

Нет отзывов