eMTA Installation for High-Speed Data Service
The following procedures explain how to set up and configure your eMTA if you plan
to use high-speed data service.
1. Turn your PC off and unplug it from the power source.
2. Connect your PC to the
Ethernet
port.
3. Insert the AC adapter cord into the power connector on the back of the eMTA.
Then plug the power adapter into an AC power source.
4. Plug in your PC and turn on the power.
5. Connect the telephone port to your home telephone jack or directly plug a
telephone into the telephone port.
6. Connect the active RF coaxial cable to the
CABLE
connector.
Note:
To add a TV, a DHCT or set-top box, or a VCR, use an optional cable signal splitter.
7. Once connected, the eMTA will begin an automatic search which may take up to
5 minutes to locate and sign on to the broadband data network.
Installation Diagram
The following illustration depicts the eMTA wiring connections.
V.1
eMTA
Cable Modem User Manual
