background image

ASUS EBE-4U

3-15

RAID Device ID

Allows you to choose RAID device ID. Configuration options: [Client] [Alternate]

Use RST Legacy OROM

Allows you to use RST Legacy OROM when CSM is enabled. Configuration options: 

[Disabled] [Enabled]

Aggressive LPM Support

Allows you to enable PCH to aggressively enter link power state. Configuration options: 

[Disabled] [Enabled]

Serial ATA Port 1 ~ Serial ATA Port 6

Port 1~ Port 6

Allows you to enable or disable SATA Port. Configuration options: [Disabled] [Enabled]

Hot Plug

Allows you to designate this port as Hot Pluggable. Configuration options: [Disabled] 

[Enabled]

3.3.11  Network Stack Configuration

Network Stack

This item allows user to disable or enable the UEFI Network Stack. Configuration options: 

[Disabled] [Enabled]

The following items appear only when you set 

Network Stack

 to 

[Enabled]

.

IPv4 PXE Support

Allows you to enable or disable IPv4 PXE boot support. If disabled, IPv4 PXE 

boot support will be unavailable. Configuration options: [Disabled] [Enabled] 

IPv6 PXE Support

Allows you to enable or disable IPv6 PXE boot support. If disabled, IPv6 PXE 

boot support will be unavailable. Configuration options: [Disabled] [Enabled] 

PXE boot wait time

Use /- or numeric keys to set the value for wait time (in seconds) to 

press ESC key to abort the PXE boot.

Media detect count

Use /- or numeric keys to set the value for number of times the 

presence of media will be checked.

Содержание EBE-4U






































































Отзывы: