background image

78

4.7.2 Firmware Upgrade

NOTE:  Download the latest firmware from the ASUS website at       

http://www.asus.com

To upgrade the firmware:
1.  From the navigation panel, go to Advanced Settings > 

Administration > Firmware Upgrade tab.

2.  In the New Firmware File field, click Browse to locate the 

downloaded file.

3. Click 

Upload

NOTES:  

•  When the upgrade process is complete, wait for some time for the 

system to reboot. 

•  If the upgrade process fails, the xDSL modem router automatically 

enters rescue mode and the power LED indicator on the front panel 

starts flashing slowly. To recover or restore the system, refer to 

section 5.2 Firmware Restoration

4.7.3 Restore/Save/Upload Setting

To restore/save/upload xDSL modem router settings:
1.  From the navigation panel, go to Advanced Settings > 

Administration > Restore/Save/Upload Setting tab.

2.  Select the tasks that you want to do:

•  To restore to the default factory settings, click Restore, and 

click OK in the confirmation message.

•  To save the current system settings, click Save, navigate to 

the folder where you intend to save the file and click Save.

Содержание DSL-N17U

































































































































Отзывы: