Asus DSBF-DM Скачать руководство пользователя страница 46

Страница: 46 / 204

2-26

Chapter 2: Hardware information

• When installing an optional ZCR card, install the card on PCIX5 slot (colored

green on DSBV-DX/SAS model).

• The optional ZCR card for DSBF-DM/SAS onboard LSI 1068 SAS controller

is LSI MegaRAID SAS 8300XLP card. Visit the LSI LOGIC website (www.

lsilogic.com) for more information.

2.5.7

DDR2 SODIMM socket

The DDR2 SODIMM socket on the

motherboard supports an ASUS

Server

Management Board 3 Series (ASMB3).

SODIMM socket

2.5.4

PCI Express x16 slots (x8 link)

The onboard PCI Express x16 slots provides x8 link to the ESB2. These slots are

designed for various server class high performance add-on cards like SCSI RAID

card, fiber-channel card, etc.

2.5.6

PCI/PCIX slot

The PCI/PCI-X slots support cards such as a LAN card, SCSI card, USB card, and

other cards that comply with PCI 2.3 and PCI-X 1.0 specifications.

2.5.6

ZCR slot

(DSBF-DM/SAS model only)

The 64bit PCI-X slot (green) on the motherboard supports a Zero-Channel RAID

card that allows RAID0, RAID1, RAID10 and RAID 5 configurations.

PCIEx16 slots

PCIX slot

ZCR slot

Содержание DSBF-DM













































































































































































































Результаты поиска

Содержание DSBF-DM

Отзывы:

Бренды по названию

Популярные бренды

Asus DSBF-DM, Руководство пользователя

Результаты поиска

Содержание DSBF-DM

Отзывы:

Бренды по названию

Популярные бренды