Asus DS300 G2 Series, Руководство пользователя

Страница: 174 / 262

DS300f G2 Series User Manual
168
s
huttInG
d
own the
s
ubsysteM
(Clu)
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• "Shutting down the ASUS DS300f G2 – Telnet Connection" on page 168
• "Shutting down the ASUS DS300f G2 – Serial Connection" on page 168
S
huttInG Down the
aSuS DS300
f
G2 – t
elnet
c
onnectIon
This function shuts down the ASUS DS300f G2 subsystem on a Telnet connection. Additional action is required,
as described below.
Important
If you have a JBOD Expansion, always power off the RAID subsystem first. Then power
off the JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Shutdown or Restart
and press
Enter
.
3. Highlight
Option
and press the spacebar to display
Shutdown
.
4. Highlight
Submit
and press
Enter
.
A warning message appears.
5. Press Y to continue.
The screen goes blank.
6. Wait for no less than two minutes.
7. The subsystem will then turn off the system power one after another.
S
huttInG Down the
aSuS DS300
f
G2 – SSh c
onnectIon
This function shuts down the ASUS DS300f G2 subsystem on a SSH connection. Additional action is required,
as described below.
Important
If you have a JBOD Expansion, always power off the RAID subsystem first. Then power off the
JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Shutdown or Restart
and press
Enter
.
3. Highlight
Option
and press the spacebar to display
Shutdown
.
4. Highlight
Submit
and press
Enter
.
A warning message appears.
5. Press Y to continue.
6. Close your SSH session.
7. Wait for no less than two minutes.
8. The subsystem will then turn off the system power one after another.
S
huttInG Down the
aSuS DS300
f
G2 – S
erIal
c
onnectIon
This function shuts down the ASUS DS300f G2 subsystem on a serial connection. Additional action is required,
as described below.
Important
If you have a JBOD Expansion, always power off the RAID subsystem first. Then power off
the JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
Shutdown or Restart
and press
Enter
.
3. Highlight
Shutdown or Restart
and press
Enter
.
4. Highlight
Option
and press the spacebar to display
Shutdown
.